Last week was truly busy with lots of home projects , I am happy to say I wrapped up the master bath updates as of late Friday night. I finished off the furniture foot detail I had planned for the vanity. What a difference this pretty simple projects makes.
 Before without feet ...

 I also after much searching found some art for the bathroom , this print I found at Winners. It reminded me of our trip to Mexico , stormy beach which we experienced there, believe it or not it conjures up fond memories. This print came with a black frame with a reveal gap around it that I found strange so I simply removed the outer frame. I was happy to find a piece that had the color of my vanitiy in it also , that was a bonus.
 I was asked to explain how I attached the frame to my existing mirror. Well there are lots of tutorials out there but I will explain how I did install this extra wide frame. I decided to use construction adhesive to the mirror to attach the frame. I started with the bottom piece , I placed four long screws just below the mirror to act as support to hold the wood in place while the adhesive dried. I added the tape to hold the wood in place while it dried. After 4 hours the adhesive was set up enough to hold the wood solidly. I added the side pieces and leveled everything . After several more hours I attached the top piece of the frame. I painted everything and trimmed it all before I attached anything as well as the back of the wood, because of the reflection. That was it , pretty simple. I didn't remove the clips and they didn't pose a problem.
 I then moved on to creating furniture detail feet for the vanity.
 Creating these is pretty self explanatory from this photo.


 Wondering what this is? Well it was a pile of boards that I glued and laminated together...to create a wood counter top for my laundry room. I could have just bought a butcher block from Ikea but I thought what if I can make my own? It worked out . I used a belt sander to get an incredibly smooth finish...I then routered a beautiful roman ogee edge. I am going to install a under mount sink and I am planning on routering that cut out too. Exciting !!!! Now that I have learned how to do this the possibilities are endless.

Before the sanding started...
After a lot of sanding...

So now that it's Monday I will work on cutting out the sink hole , finishing the staining and sealing . Then moving onto building a sink cabinet and support for the counter, moving onto tiling the laundry baksplash. We will see how productive this coming week will be , I will keep you posted.
 
Top